[Fixed] HP printer error 99.09.67 | Call @ 844-813-3268

HP Printer provides any type of support in 24 Hours. The Hewlett Packard products have been around since a long time due to its quality and efficiency of the products have made this company a household name. The product range is brilliant and has a solid customer support system. HP has launched a large number of printers; all for different picture quality and requirement. One of the most popular examples of this is the T520.

HP printer error 99.09.67

HP  printer error 99.09.67 : Disk is not bootable please download firmware

 Country  Toll-Free Number
HP Printer Support phone number   +1-844-813-3268

The advantages of using HP printers are immense but users do encounter some issues from time to time.

What are the causes HP printer error 99.09.67?

The major reason of this HP printer error 99.09.67 occurring is that the firmware is not loaded on the hard disk drive. This may have been caused by the installation of a new disk or due to performing a Clean Disk command.

How to fix HP printer error 99.09.67?

Step 1- Load the firmware.

  • Turn on the printer.
  • Press the HP logo in the middle of the screen when you see the “1/8” under the logo.
  • Press button 3 and button 9 to highlight the “Administrator”.
  • Click on OK.
  • Press button 3 and button 9 to highlight “Download” and then press OK.
  • Again, press button 3 and button 9 to highlight the USB Thumb drive.
  • Select the “.bdl” file, and then click on “OK” or the button 6, and then wait for the update process to complete.

NOTE:

It’s a possibility that the firmware doesn’t get recognized when accessing the pre-boot menu USB thumb drive option. If it happens to you, follow the steps to fix HP printer error 99.09.67 given below to resolve the problem-

  • Format the USB to exFAT or Fat32.
  • Use a USB thumb drive with less memory capacity.
  • Use another USB slot on the printer if it is available.
  • Wait for “Complete” to be displayed on the control panel.
  • Press the back arrow until Continue displays.
  • Click on “Continue”, and then wait for the printer to automatically reboot.

For Single function colour or monochrome printers, follow the steps given below :

  • Turn on the printer.
  • While the device boots up, take note of the following indicator lights on the control panel –
  1. Ready
  2. Attention
  3. Data
  • Press “Stop” when all the indicator lights are stable. This is when the pre-boot menu appears.
  • Now, navigate using the up and down buttons to select “Administrator” and press OK.
  • Do the same to select “Download” and press OK.
  • Again, use the up and down buttons to navigate to the USB Thumb drive and then select it.
  • Select the “.bdl” file, select OK or press the 6 key, and let the update process to complete.

NOTE-

It’s a possibility that the firmware doesn’t get recognized when accessing the pre-boot menu USB thumb drive option. If it happens to you, follow the steps given below to resolve the problem-

  • Format the USB to exFAT or Fat32.
  • Use a USB thumb drive with less memory capacity.
  • Use another USB slot on the printer if it is available.
  • Wait for “Complete” to be displayed on the control panel.
  • Press the back arrow until Continue displays.
  • Click on “Continue”, and then wait for the printer to automatically reboot.

Contact HP Printer Support Number for further assistance

Read This: HP Printer Error 59.F0 | HP Office jet Pro 8600 Printer | Hp printer cannot print after windows 10 update

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *