[Solved] What are the Canon mx860 fax problems ?

Steps to fax using Canon printer without Canon mx860 fax problems

Step 1 Place the original document to send on the Platen Glass or in the ADF.

Step 2 Adjust the image quality (Fax resolution) and density (Scan contrast) according to your requirement using the commands available in the machine.

Call at Canon Tech Support Number [+1-844-813-3268 ]

Canon mx860 fax problems

If you are getting these issues like Canon mx860 fax problems then resolve it by calling at Canon Tech Support :

 Country  Toll-Free Number
 Canon Printer Support phone number USA  +1-844-813-3268

Step 3 Use the speed dial to start dialing. Be careful not to use speed dial in case your machine is connected to PBX or any other telephone switching system.

Step 4 Now, you can start sending faxes depending on whether you’re using Platen glass or ADF. The steps for both the methods are given below –

  1. Using the Platen Glass –
  • Press the Color or Black button depending on your requirement.
  • If the document to be faxed is a single page, simply start dialing.
  • If your document has multiple pages, load the next page on the Platen Glass and press the Color or Black button. Colour sending is possible only if the recipient’s fax machine supports colour faxing
  • Repeat this procedure until all originals are loaded.
  • Finally, press the “OK” button to send the fax once all your documents are loaded.
  1. Using the ADF –
  • Press the Color or Black button.
  • The document is sent automatically once you’ve completed your colour preference.

How to cancel sending a fax when you are getting Canon mx860 fax problems ?

  1. Before sending the fax-

 Press the “Stop” button.

  1. The process will get cancelled.
  2. While it is being sent –
  • Press the “Stop” button.
  • Wait for further instructions to appear on the LCD screen.
  • Carefully follow on-screen instructions.
  1. Document stuck in the ADF –
  • If the document remains in the ADF after you’ve pressed the Stop button during scanning, wait a couple of seconds for on-screen instructions.
  • The message “Document in ADF “.
  • Press OK to discharge document will appear on the screen.
  • Press the “OK” button to release the document from the ADF.
  1. I was sending a fax but the process didn’t finish because the recipient line was busy. What should do?
  2. The device has a feature to automatically redial the recipient’s number after a specified interval.
  3. Just wait for the specified amount of time; the fax will complete sending automatically.
  4. This feature is enabled by default.

How to cancel a pending fax when you are getting canon mx860 fax problems ?

  1. Wait until the machine starts automatic redialing.
  2. Press the “Stop” button once the redialing starts.

How to send a fax manually when you are getting canon mx860 fax problems ?

  • Using the Hook Button.
  1. Press the Hook button.
  2. Now, press the Numeric buttons and carefully dial the recipient’s fax/telephone number. One-touch speed dial or coded speed dial can be used while dialing manually.
  3. If you are only sending a fax and not speaking with the recipient on the phone, press the colour or black button according to your preference.
  4. If you’re also going to speak to the receiver, pick up the handset of the telephone connecting to your fax machine; you can now start talking to the recipient.
  5. If on picking up the handset, you hear a high-pitched voice instead of the recipient, press the colour or black button.
  6. Make sure you ask the recipient to operate their fax machine to receive faxes.
  7. Hang up the handset.

Comment below if you have any queries regarding what are the Canon mx860 fax problems 

Read This: HP printer error 49.4a.04 | HP printer error 99.09.67 | HP Printer Error 59.F0

Canon printer spooling problem

[Resolved] How to fix Canon printer spooling problem ?

A printer is an output device. It is meant for taking hard copy of various documents stored in our computer. Printers are of various types like inkjet printers and laser printers. Canon is a company which is well known for its high quality printers. The printers manufactured by Canon are mostly laser printers which are capable of producing printouts of extremely high quality. These printers are durable and user-friendly as well. Getting Canon printer spooling problem, Contact Canon Tech Support.

 Country  Toll-Free Number
Canon Printer Support phone number   +1-844-813-3268

What is Canon printer spooling problem ?

Canon printer spooling problem

Spooling is nothing but the process of transferring documents which are meant for printing from their respective files and folders to an intermediate place. Canon users quite often complain that they are facing Canon printer spooling problem where the documents to be printed cannot be moved from the source to the desirable destination. This is quite a major issue as in such cases; we are no longer able to get proper printouts.

How to troubleshoot Canon printer spooling problem ?

There are quite a number of ways to troubleshoots Canon printer spooling problem. They are as follows:

METHOD 1: The first method that we have in hand is to change the Print Spooler properties. The steps to do so are as follows:

  • Go to the Start button present on the Taskbar at the bottom of your Desktop screen.
  • Click on Control Panel.
  • Click on Administrative Tools.
  • Go to Services.
  • Click on Print Spooler.
  • You will see the Stop and Start button in the main Window that opens. Stopping and then once again starting the spooler may resolve some of your problems.
  • Go to the Startup options and from the list of options that appear click on Automatic. This will make sure that the spooling process will start automatically as soon as you try to print a document.
  • Click on Apply.
  • Go to the Recovery tab and make necessary changes to the recovery settings.
    Go to the Log On tab.
  • Click on Forbid interaction with Desktop.
  • Click on Apply.
  • Next, go to the Dependencies tab and make necessary changes to the Dependencies option.
  • You may even Restart your machine and try again.

Hopefully, your problem will be solved. If not, then you will have to move on to the next methods to resolve canon printer spooling problem.

METHOD 2: The next method that we have in hand is to restore the default state of the printer. You can do so by the following techniques:

  • Clear the printing queue. The steps to do so are as follows:
  • Click on Windows+R keys simultaneously from your keyboard.
  • In the dialog box that opens, type services.msc and press Enter.
  • Go to the Print Spooler.
  • Click on Stop.
  • Navigate to C:\Windows\system32\spool\PRINTERS and open this folder.
  • Delete all the files present in that folder except the Printers folder itself.
  • Return to the Services window.
  • Select Print Spooler, and click on Start.

You may even update the printer drivers. It may so happen that the printer driver that you are using is incompatible with the operating system that you are using. It that case, it becomes necessary for you to update your printer driver before you can use your printer successfully.

Comment below if you have any queries regarding Canon Printer spooling problem

You may also see:

canon printer not printing color correctly

[Resolved] How to fix canon printer not printing color correctly ?

Faint print is one of the most common printer issues. The cartridges could simply be empty or running low so give them a check. One can do this on the PC by going to the control panel and looking at the printer properties or cartridge status. This will tell exactly how much ink or toner is left in the cartridges and whether they are causing any such problem. Never run more than three consecutive cleanings Getting canon printer not printing color correctly, then Contact Canon Tech Support.

 Country  Toll-Free Number
Canon Printer Support phone number   +1-844-813-3268

What are the symptoms of canon printer not printing color correctly ? 

It’s pretty usual that the print-head is jammed with semi-dry ink which has a paste like consistency so new ink from the cartridges can’t get through to the paper or some colors are only partially getting through. And it also won’t print the picture unless it is in Black and White.

canon printer not printing color correctly

What are the causes of canon printer not printing color correctly ?

Blockages occur if the printer isn’t used to print all the colors at least every couple of days. Inkjet printers use gravity and a ‘siphoning’ method which deliver the ink to the print-head. There are no little pumps or complicated vacuum systems to keep the ink flowing.  If air gets into the nozzles, it will block the flow of ink.  If ink dries on the print-head then this will effectively block the flow.

How to get rid of canon printer not printing color correctly ? 

Most Canon inkjet printers have a removable print-head assembly. Remove cartridges then the print-head assembly according to the printer manual. To clean print-head assembly, use a mixture of 50% distilled water and 50% window cleaner. Remove the print-head and carefully blot any excess liquid off the print-head assembly with a paper towel. Replace the print-head assembly and cartridges. Run a few dense pages of graphics to get the ink flowing properly.

If the problem is still not fixed by this then proceed with the following procedures.

Step 1

The blockage may be too severe for the printer driver’s nozzle-cleaning process to shift so try it under the “Maintenance” tab in the printer preferences software.

Step 2

An ink cartridge can be low, empty or even clogged and the printer cannot print correctly if it lacks one of the basic colours. To see if it will print a test page or not we can follow these steps.

Go to Start, settings, printers. Right click on the printer, properties, print test page.
If that doesn’t work there should be a head cleaning option in properties that will clean the print heads.
If the ink cartridge is still clogged, saturate a q-tip with alcohol and lightly rub the print-head and if nothing is found after that then it’s either badly clogged, low or out of ink and needs to be replaced.

Step 3

  • If the Nozzle Check Pattern prints correctly then the inks and print-head are configured and are working properly and try printing from a different application.
  • If the Nozzle Check Pattern prints incorrectly, proceed with the next step.

Step 4

  • Check that all of the packing material has been removed from the ink tanks and that they are installed correctly to confirm there is no paper jam.
  • After confirming that the ink tanks are installed correctly print the Nozzle Check Pattern again.
  • If the Nozzle Check Pattern prints incorrectly, go to the next step.

Step 5

  • Clean the print head to improve print quality.
  • After cleaning the print head, print the Nozzle Check Pattern again.
  • If the Nozzle Check Pattern prints incorrectly.

Call the manufacturer if the printer is under warranty.  Canon will replace the print-head assembly if it is under warranty.

Comment below if you have any queries regarding Canon printer not printing color correctly 

You may also see:

Canon lbp 2900 Paper Jam problem solving

[Resolved] How to fix Canon lbp 2900 Paper Jam problem solving ?

If the Canon lbp 2900 Paper Jam problem solving occurs, the <Paper Jam> is displayed. And press <Next> to view simple solutions. If it is difficult to understand the on-screen actions, see the sections below to remove the jam. When the jammed paper is removed, do not turn the machine off. Turning off the device will delete data that is being printed. Are you getting Canon lbp 2900 Paper Jam problem solving? Contact Canon Tech Support.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

What are the causes and symptoms of Canon lbp 2900 Paper Jam Problem Solving ? 

If paper is torn, remove all pieces of paper to prevent them from jamming.If the paper is jammed repeatedly, press the stack of paper on a flat surface to level the edges of the paper before loading it into the machine.Check that the paper is suitable for the device. Check that there is no paper residue stuck in the machine.

Canon lbp 2900 Paper Jam problem solving

Avoid removing the document or paper jammed from the machine. Removing the paper strongly may damage the parts. If the paper can not be removed, contact your local authorized Canon dealer.

How to get rid of Canon lbp 2900 Paper Jam Problem solving ? 

Paper jam cases in tray 1

1      Remove jammed paper from the output tray.
2      Press the button on the left cover of the main unit of the printer, and then open the left cover.
3      Open the left cover of the tray 1.
4      Remove the jammed paper.
5      Hold the handle, and pull the tray 1 out until it stops.
6      Remove the jammed paper.
7      Push the tray 1 gently into the device again until it clicks into place.
8     Close the left cover of the tray 1.
9     Place your hands where the hand symbol is located on the left cover of the main unit, and then gently close the left cover until it clicks into place.

Paper jams around the output area

  • Remove jammed paper from the output tray.
  • Press the button on the left cover of the main unit, and open the left cover.
  • Remove the jammed paper.
  • The installation assembly and surrounding parts inside the printer are heated during use. Make sure that the installation assembly is completely cool before removing jammed paper. Touching the installation kit when it is still hot can cause burns.
  • Open the left cover of the tray 1.
  • Remove the jammed paper.
  • Close the left cover of the tray 1.
  • Place your hands where the hand symbol is located on the left cover of the main unit, and then gently close the left cover until it clicks into place.

If the paper is jammed, the indicator (warning) flashes, and the message <Paper Jam Inside the Printer> and the paper retention locations are displayed in the printer status window. Remove the gradients in the order shown for the warming positions following the procedures described in the sections indicated below. Before you begin, read safety instructions carefully in important safety instructions—

<Inside the back cover>
Paper jams inside the back cover

<Inside the top cover>
Paper jams inside the top cover

When you remove the jammed paper, do not turn the machine off. Turning off the device deletes the data being printed. If paper is torn, Remove paper residue to avoid being trapped. If the paper is held repeatedly, Press the paper stack on a flat surface to equal the edges of the paper before loading it into the machine. Check that the paper is suitable for the device. Paper Check that there is no paper residue hidden in the machine. Do not remove the paper that is being pulled from the machine Removing the paper by force may damage parts of the machine. If you can not eject paper, contact your local Canon dealer or Canon Help Desk. When the problem can not be resolved.

If you click [Troubleshooting Details], you can view the same troubleshooting methods to fix Canon lbp 2900 Paper Jam problem solving that are described in this guide.

Comment below if you have any queries regarding Canon lbp 2900 Paper Jam Problem solving 

You may also see:

[Fixed] How to fix Canon mx310 printer problems ?

Printers are a kind of output devices. They are used to produce hard copies of documents present in our computer. The printouts are in the form of texts, graphics or images. Canon is a company which is well known for its high quality printers. These printers are mostly laser printers which are capable of producing high quality prints. They are also user-friendly and affordable and can be used in both homes and offices.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

What is Canon mx310?

Canon mx310 is a type of wireless printer from the series of Canon printers. It is a kind of inkjet printer which sprays ink on the paper through e nozzle to produce the printouts.

Canon mx310 printer problems:

Canon mx310 may experience various problems from time to time while we are trying to print a document. The various issues that are faced by Canon mx310 users from time to time are as follows:

  • Printer is not printing.
  • Ink is not being ejected from the printer.
  • Printer is not producing proper prints.
  • Printer is not starting.Canon mx310 printer problems

 

How to troubleshoot Canon mx310 printer problems ?

When the printer is not starting:

The steps are as follows:

  • First of all, you will have to make sure that the plug is properly attached to the printer. Put the plug properly at the back of the printer and then turn it on.
  • Secondly, you can try to pull out the plug from the back of the printer and leave it in that state for two to three minutes. After that, you the put the plug back and try to start your device.

When ink is not being ejected from your printer:

The steps are as follows:

  • First of all, you should check the cartridge of your printer. See whether it is running out of ink. If so, then you will have to replace your cartridge with a new one and try to print a page.
  • Check whether the nozzle of your printer has become blocked or jammed. If so, then carefully clean the nozzle and check whether you printer is able to print or not.
  • You should also check whether the cartridge has been properly installed on your device. If not then you should install it properly and then restart your printer.

If you printer is not printing properly:

The steps are as follows:

  • Check whether the plug of your printer is properly attached to the back of your device.
  • Check whether the lamp on your printer is flashing or not. If so, it means that your printer is still initializing itself. Wait for the lamp to stop flashing and then try to print a page.
  • If you are trying to print a large number of pages at one go then stop the process and try to print the pages part by part.
  • Check whether the front tray of your printer if open or not. If it is closed, then you should open it and then start working on your device.

If the above mentioned steps fail to yield successful results, then you should contact Canon Printers Technical Support and ask for their advice.

Comment below if you have any queries regarding Canon mx310 printer problems

You may also see:

printer color problems canon ip2770

[Solved] How to fix printer color problems canon ip2770 ?

Printers are excellent when they work, nevertheless, if they do not it might be extremely unsatisfying. Here’s how to steadfastness some of the most common problems, including not printing at all to blocked jets and additional issues. Printers can run unfailingly for quite some time and a gigantic number of prints, but like a breakdown or are incorrect entirely. Getting printer color problems canon ip2770 issues, Then contact Canon printer Support.

 Country  Toll-Free Number
Canon Printer Support phone number   +1-844-813-3268

Sometimes the object is by over- or under use. Many people don’t use their inkjet printers habitually adequate and this may indicate to difficulties with dried-up ink hindering the nozzles. Overuse is more unusual than misuse: paper clips, hair bands as well as food can fit printers and cause paper jams (and worse).

printer color problems canon ip2770

Canon ip 2770 printer could be the creation that considered very agile and economical in terms of the price. In case you have finances just limited but you want to contain the simple printer, this kind of printer might represent people wish. To start with you decided to select this sort of printer; I must inform you of the regular conditions that usually found a lengthy like the operational with this printer.

Canon Deskjet IP 2770 printer has performance that very agile and fast, though the quality result adequate for standard office document, arguably it really is much used for make office archives and something like that. These kinds of the printer are having a something less when you wish to create any prints with many different straight lines. You cannot be expected excessive about it, for the reason that printer produces just for standard quality. For the quality results this type of picture book and graphics, I would say it’s worth adequate.

What are the symptoms of printer color problems canon ip2770 ?

When Printing Becomes Faint or Colors are Incorrect

When printing becomes faint or colors are incorrectly to set up ink remains within the ink tanks, the print head nozzles are most likely clogged. Print the nozzle check pattern to substantiate the healthiness of the nozzles after which does the Print Head Cleaning.

What are the causes of printer color problems canon ip2770 ?

Some physical issues which result in the printer color problems canon ip2770 are as follows:

  • Trapped paper can origin the printer cartridges to inappropriately bring into line. Eradicate all stuck paper entirely to resolve the problem.
  • Cartridges that are muddy cause whizzing and ruining, which ancestries misalignment.
  • In the occurrence the cartridges are mass-produced by the third-party, it’s conceivable that they’re successful to not fit appropriately in the cartridge receptacle. Trade any cartridges that are not the printer industrialist’s cartridges.

Simple steps to get rid of printer color problems canon ip2770

Here are some of the solutions for the fixation of the printer color problems canon ip2770

  1. Crisscross to get if nearby is slightly paper trapped in the printer
  2. Exchange congested or muddy design cartridges with new-fangled ones.
  3. Connect new-fangled manufacturer’s cartridges in the printer.
  4. You can try turning off the printer and detach the cords. Try to turn it ON again after reconnecting the cords and then wait for the printer to be completely ready. Try testing a print! Hopefully this will fix the issue.

Comment below if you have any queries regarding printer color problems canon ip2770

You may also see:

Continuous ink Problem in Canon ip2770

[Solved] How to resolve continuous ink problem in Canon printer ip2770 ?

Do you also get errors like continuous ink problem in Canon printer ip2770. It is common for renovated canon ink cartridges to read as empty or low. This is because the ink monitor chip (especially those made with specially built print head) in the cartridge are intended for use only once.

continuous ink problem in Canon printer ip2770

Your reproduced canon ink cartridges are actually full and ready to print. Just ignore the message, click OK (or CONTINUE), and continue printing. Some printers, predominantly Canon inkjet models, would not print if the cartridge states as void. You’ll likely be given an error alert, shown below:

“Your ink is low or void” or “Your ink has come to an end and for you to switch the cartridge with new one.”

Getting continuous ink problem in Canon printer ip2770 again and again, contact Canon Printer Support

 Country  Toll-Free Number
Canon Printer Support phone number   +1-844-813-3268

What are the symptoms of continuous ink problem in Canon ip2770 ?

To know more, Canon printer ink error like continuous ink problem in Canon printer ip2770 alert shows that your ink is low or void. Moreover, Canon printer ink error alert shows that your ink has come to an end and for you to switch the cartridge with new one. No need to panic! Even if your ink is full, Canon printer can show such error alerts. You can circumvent these error alerts by holding down RESUME, STOP/RESET, or COLOR START switch for 5 to 15 sec of your printer. The ink monitor will shut down, the printer will stop flashing, and the printer itself will recommence printing.

How to resolve the problems regarding Continuous ink Problem in Canon ip2770?

Here are some of the solutions of continuous ink problem in Canon printer ip2770, mainly if the ink problem persists. You can always try Troubleshooting!

In conclusion, here are some more troubleshooting advices to help you to develop remanufactured Canon ink cartridge’s enactment.

  1. Each and every time perform printer cleaning process, deep cleaning, and configuration test after you install new ink cartridges in your printer. Print a small number of test pages to confirm appropriate ink flow and truthful configuration.
  2. If the printer does not identify the cartridge, take out the cartridge and gradually wipe the electrical acquaintances of the cartridge using a fresh paper towel or a lint-free cloth. This is to eliminate the dust and dregs that may have been hindering the electrical contacts from the printer.
  3. If the printer still does not identify the cartridge, try drawing out the unrecognized cartridge, switch off the power on the printer and disconnect the printer for approximately 30 to 60 seconds. Plug into the socket and power on the printer back and try to reinstall the cartridge and print.
  4. For cartridges with print heads, occasionally the cartridge has been set aside uniform or upside down for weeks or months, therefore inks are not getting to the print head which avoids the new ink cartridge from printing. To clean, moderately place the cartridge with the print head facing down on a clammy paper towel until ink flow is observable. Reinstall the ink cartridge and print.

Comment below if you have any queries regarding How to resolve continuous ink problem in Canon printer ip2770  

You may also see:

How to fix 6A81 Error in Canon Printer MG5320 ?

What is 6A81 Error in Canon Printer MG5320 ?

The error code is essentially caused by an obstruction among the printer, typically a paper jam, however, could be any foreign body that has found its method into the printer (those with young kids can understand). The obstruction stops the carriage and print head from getting into the proper position once powering up the printer. The print head ought to return to rest at the correct hand aspect of the carriage and position itself over the waste ink sponges. If the print head is unable to do so, it returns the ‘6A81 Error in Canon Printer MG5320’ error message.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

Sometimes, the position of the two waste ink sponges towards the correct hand aspect. The sponges are spring loaded and move backward and forwards once the printer data format happens upon embark.

The problem in some of the user’s case was caused by two items of torn paper. One at the way right of the printer that was simple to get rid of, however, the other was stuck in a very little opening behind the spring mechanism for the waste ink sponges. This was preventing the sponges from being affected freely and seated properly, that successively meant that the print head was unable to miss them and are available to rest within the correct position.

To remove the torn paper we just have to turn off the power to the printer (to stop any harm to the carriage mechanism) and used a try of tweezers to carefully pull the offending article through the little gap. We may have a tendency to lost this hidden piece of paper at an initial time. We checked for obstructions, therefore, it’s worth shining a torch in and having a good nose around. Close your printer lid, power on the printer.6A81 Error in Canon Printer MG5320

Solution for 6A81 Error in Canon Printer MG5320:

There are some simple steps to overcome 6A81 Error in Canon Printer MG5320-

Solution 1:

This is often a purge unit error.

There may be one thing jamming the purge unit or simply an absorber out of place that is picking up on the carriage preventing it from moving properly.

Try to move the carriage faraway from the purge (its wherever the printhead/carriage parks its self on the correct aspect of the machine) with no resistance then you’ll be able to shine a torch into the machine and look at the purge unit.

There maybe crumpled paper jammed within the purge.

If all looks well, the purge unit could also be defective and had to get replaced.

Solution 2:

The wiper on the purge might have stuck. It slides back and forth and that they are known to stay.

Push it with an extended screwdriver to check if it moves.

Solution 3:

Something is blocking the printer within. It may well be a paper jam or a foreign object.

Check to employ a flashlight, to confirm there’s nothing obstructing the device mechanism down within the printer wherever it’s not simply seen.

If there’s nothing obvious, undo the printer power provide.

Solution (3-a)

Printer off.

Bring by hand the ink-carrier to the correct aspect.

Push down fastidiously on the carrier, hold on and shelter the printer: push the left side of the carrier down, as a result of it can return up.

Solution 4:

Take a dry material and clean the rubber rollers within the automatic sheet feeder. Dirt could also be coating the rollers there and as they become less tacky, they can’t feed paper properly.

Solution 5:

Hold the printer in each hands (you may have another person to assist you), flip it upside down and shake it for a couple of seconds to check if something falls out of the device space. (Sometimes objects like pens, paper clips and so on, will constitute the device space and cause blockages.)

Then plug the printer duplicate, take your paper out and replace it with a recent, little stack (about 5 pages) of paper. Then try and form feed once more. If that works, then try and print once more

Thus Follow these steps to resolve ” 6A81 Error in Canon Printer MG5320″

Comment below if you have any queries regarding 6A81 Error in Canon Printer MG5320

You may also see:

How to fix Canon LBP 2900 Feeder Problem ?

Canon LBP 2900 Feeder Problem:

Paper feed problem may occur anytime with any branded printer if not used in the correct manner. No matter, how expensive the machine is, it tends to occur some technical faults when using for a long time. Canon is a well-known brand of a printer but users confront the same issues in it as in other products. Well, it’s not like that the problem is due to machine, it may cause due to your carelessness also. Instead of blaming anyone else, let’s move ahead with its solution.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

Symptom of Canon LBP 2900 Feeder Problem :

Feeding blank sheets endlessly and some time obtaining Paper Jam Error on a computer screen with paper suction within the printer.

As per symptom, the probable culprit area is Paper pick up assembly. Even on removing the cartridge for visual review because sometime you’ll be able to realize ball pen, refills paper clips, eraser elastic band and so on in paper pickup assembly (Mishandling by the user and if this can be for home use then it positive this inventive work done by children’s).

But as after inspection from toner cartridge location, sometimes we can find any suspicious things as explicit above. Therefore, we to dismantle the printer.Canon LBP 2900 Feeder Problem

First of all, we have to remove the paper pickup pad unit and clean the area with IP.

As per explicit the fault symptom, the which means that it’ll simply keep throwing out blank sheets no end the Gear once single page output signal command. Therefore this half is handling by solenoid Unit that gets a signal from the logic board and it decides wherever to prevent the paper pickup gear once the printing.

So we have to removed solenoid unit from the Printer for any review.

On removal by visual inspecting the solenoid unit, there could be found some sticky grease like substance is there on coil clutch plate.

So clean the surface with wet material with IP. Therefore here is that the culprit for higher than said fault symptom. Solenoids are accustomed to controlling the timing of the paper feeding.

Just clean the coil with IP tack everything back and tested by giving print commands from the setup, it works fine while not paper jam and not feeding blank sheets endlessly.

How to resolve Canon LBP 2900 Feeder Problem ?

Paper not feeding properly may be accompanied by paper jams, too. Printer and paper preparation will go an extended way to alleviate these types of problems. Follow some steps to make sure your paper feeds properly in your Canon printer.

Step 1.

Remove any jammed paper from the Canon printer. Pull the paper out from the sheet feeder within the direction that the paper was traveling. this can facilitate avoid damage to the rollers and associated plastic components. allow the printer to reset itself subsequently.

Step 2.

Lift any covers and lids, and wipe the rollers with a soft, damp cloth. a light-weight colored cloth can help you identify dirt that comes off the rollers. Clean the rollers gently with the cloth. Clean the rollers till no a lot of dirt seems on the cloth. allow the rollers to dry.

Step 3.

Fan and so load recent paper within the Canon printer. Use dry, flat paper. Do not fill up the tray. Discard any paper that curls or is wrinkled. Load the paper in order that the left edge rests against the paper guide. Set the paper guide in order that it fits the paper. You’ll see adorned markings on the paper receptacle that represent the dimensions of the paper you’re using. For example, move the paper guide to the “Letter” position if you’re using letter-sized paper. Make sure the paper is stacked perpendicular to the receptacle. Everything ought to be square.

Step 4.

Try the print job once more.

Clearing Paper Jams:

Paper Pickup and Transfer Guide Areas
Fusing Assembly space – top cover
Paper Jams: Rear cover – Fusing Assembly and Paper Exit Areas
Paper Jams: 500-sheet Lower cassette (not applicable at ING)
Paper Jams: optional Duplex Unit (not applicable at ING)
Table repeated Paper Jams
Paper jams occur most frequently when:

Paper cassettes don’t seem to be properly loaded.
Your print media doesn’t meet the specifications.
The media is in poor condition.
The printer desires improvement.
User-replaceable elements are carrying out.

Thus Follow these steps to resolve Canon LBP 2900 Feeder Problem

Comment below if you have any queries regarding Canon LBP 2900 Feeder Problem

You may also see:

Canon Printer Error 5200

[Resolved] How to fix Canon Printer Error 5200 ?

What is Canon Printer Error 5200 ?

The Canon Printer Error 5200 code has to do with ink levels and usage inside the printer. The printer is programmed to combine all of the remaining ink colours to form black. Soon this suggests that all ink cartridges installed within the printer are empty or getting ready to empty. Therefore the operator appearance at the ink level guide to ascertain that the black is gone and colours are nearly gone, and that they proceed by exchange solely the black ink, with the intention to use the remainder of the colour ink within the cartridges.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

However, once the black ink is put in, generally a malfunction of the printer and ink level reader can cause the error code 5200 to appear. There are some who feel this could be a conspiracy of the ink racket to sell a lot of ink by forcing you to replace all cartridges at once.

Regardless of any ulterior motives concerned in this error code, there are some simple solutions you’ll attempt to get the error to go away.

How To Reset the Canon Printer Error 5200 :

The first step in trying to resolve the error code 5200 is to show the printer off and wait many seconds before turning it back on. this could have the impact of resetting the ink level scanners in order that they read properly.Canon Printer Error 5200

If this doesn’t work, following step is to get rid of the power cord and fully unplug the printer. This could serve constant reset operate as turning the printer on and off however might do the trick if the primary step fails.

If the printer is plugged directly into an outlet and none of the above is functioning, try the following fix: turn the printer off, press the stop button and hold it down for two seconds, press the ON button, hold it and release the stop button, press the stop button 5 times then release alongside the on button. The LCD screen are blank and also the printer can reset. The pc might say that new hardware is detected – you’ll simply ignore that. Turn the printer off then turn it on an extra time.

If you have got tried all of the higher than and there’s still no improvement to the error 5200 situations, you would like to move on to dynamical out all of the ink cartridges. Even though they’re largely full, you would like to only plow ahead and place altogether new ink. This could cause a reset within the ink level gauges still, which could solve the matter.

Contact Canon directly if you can not get the error 5200 code to travel away. Your printer should be below pledge and you will be able to get further facilitate to resolve the error, otherwise, you can be entitled to a new printer

Simple steps to resolve Canon Printer Error 5200 problem:

Here are some of reasons for 5200 error to appear. Starting from the highest, proceed to consequent list item to clear the message.

  • The remaining ink level is low.
  • Check the ink level status. If the cartridge is empty, replace the cartridge.
  • The ink cartridge is defective. Replace the cartridge with a new one.
  • Instructions to replace the cartridge.
  • If replacing the cartridge doesn’t clear the error, power the printer off and on.
  • Turn off the printer by pressing the ON button.
  • Unplug the power wire
  • Plug the power wire back in then press the ON button.
  • If powering off the printer and back on doesn’t clear the error, contact the Contact Center.
  • Canon printers give reliable quality printing for home and workplace use. However, after you receive an error code 5200 on your Canon Printer, it is an exasperating situation. Here could be a simple guide to assist you solve the matter so you’ll come back to to work.

Comment below if you have any queries regarding Canon Printer Error 5200

You may also see: