How to fix Canon printer error code 2 140 21?

Why does canon printer error code 2 140 21 occur?

Canon printer error code 2 140 21 generally occurs when the scanner is being used/ installed. It can lead to poor Canon Printer performance and bad print results.

Country	Toll-Free Number
Canon Printer Support phone number	+1-877-432-0678

I’m encountering Canon printer error code 2 140 21 on my canon printer which is connected to a mac. How should I resolve this issue?

1. Make sure all your files are saved and then close all the running programs.
2. Now, properly turn off the device.
3. Next, restart your device.
4. Go to “System Preferences”.
5. Look for “Print & Fax” in the following window and then click on it.
6. Click on the device in use in the “Printer & Scanner” list and click the “– “button to remove it.
7. Now go to your main hard drive (Macintosh HD).
8. Open “Library” and then navigate to “Image Capture”.
9. Look for “Devices” in the following window and then remove all the files named after the printer.
10. Go back to the Image capture window now.
11. Select “TWAIN Data Sources” and then remove all the files named after the printer.
12. Exit the library and refresh your system.
13. Finally, use the installation disc that comes with the printer to reinstall it. You can also do so by downloading the drivers from Canon’s website if you don’t have the disc.

 

I’m encountering error 214021 on my computer while using my Canon printer. What should I do?

Simple steps to resolve Canon printer error code 2 140 21:

Step 1- Reinstall your printer/scanner drivers.

• Press the Windows Start button.
• Type “devmgmt.msc” and then press Enter.
• In the window that opens next, select “Imaging devices”.
• Look for your device in the list and then right click on it.
• Select “Uninstall” from the drop-down menu.
• Restart the computer and your drivers should be reinstalled.

Step 2- Force stop the process.

• Open the control panel.
• Now, go to “devices”.
• Select “Printer” from the device list.
• Click on “Stop printing”.
• This will end any ongoing printing/ scanning process.
• Fresh start the process.

Step 3- Reset or restart your printer.

• Make sure you unplug the printer from the power source.
• Let the printer be in this pause mode for a couple of seconds.
• Now, reconnect the power source to the printer and switch it on.
• Next, press the “Power” button and hold it for a few seconds.
• Press the “Stop” button twice now.
• Repeat this procedure once more.
• Release the “Power” button gently when you repeat the process.
• Lastly, press the “Stop” button four times.

Step 4- Reset the driver of the printer.

•  Carefully clean the cartridge and then push the reset button for 5 seconds.

Step 5- Replace the cartridge.

• Check the ink levels of the cartridge(s) in your printer and replace the ones with low ink levels.
• Be very careful while removing and reinstalling the cartridge(s) in order to protect your device from any hardware damage.

If none of the steps given above helps to solve your problem, contact the Canon customer service for further assistance.

Thus Follow these steps to resolve Canon printer error code 2 140 21

Comment below if you have any queries regarding Canon printer error code 2 140 21

You may also see:

• Problems in HP Office jet Pro 8600 Printer
• How to fix Hp printer problem with printhead
• HP printer is not connecting to computer
• Toner smears or does not stay on the paper
• Why printer is displaying a 50.4 error message
• Why my printer prints blank pages
• HP Printer is not printing from the expected paper tray
• Hp Laserjet p10007 paper pickup problem
• Hp Printer stuck on installing network device
• How to connect hp 2540 printer to Wi-Fi
• Hp scanner failure code 30.1.8
• Hp laserjet m1132 mfp error e8
• Hp laserjet m1132 mfp error e3
• Hp printer error message 0xc05d1281
• Error 0Xd0620230 on hp printers
• Hp printer in error state
• Hp printer separation pad errors
• Hp printer error 0X887DF78a
• Hp printer is displaying a 79 error
• Hp laserjet scanner error 3030
• Hp printer error 0x6100004a
• Hp LaserJet pro 400 connection error
• Windows 10 HP printer redirection not working
• Hp printer cannot print after windows 10 update
• How to resolve HP wireless printer default IP address
• Canon Printer cannot communicate with computer
• How to Fix Canon Printer Not Scanning
• Canon Printer is not printing black
• How to Fix Canon Printer In Error State Windows 10
• How to fix Canon Printer not responding
• How to fix Canon Printer not detected USB
• Canon printer error code 6000
• Canon printer error P02