How to resolve Canon IR2270 paper jam problem

[Solved] How to resolve Canon IR2270 paper jam problem ?

/0 Comments/in /by

Canon IR2270 paper jam problem can be easily resolved by Canon Printer tech Support, Just Contact Canon Tech Support

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

What are the causes of Canon IR2270 paper jam problem ? 

First of all, the error message “Canon IR2270 paper jam problem“ to find out where exactly in the printer is the paper jammed. Once you’ve figured that out.

How to resolve Canon IR2270 paper jam problem

How to get rid of Canon IR2270 paper jam problem ?

Follow the steps given below for different areas to resolve Canon IR2270 paper jam problem.

  • Delivery tray.
  1. Remove the paper from the “output tray” is the message displayed if the paper is stuck there.
  2. Hold the paper gently from both sides and pull it out very carefully. Make sure you don’t tear it during the removal
  3. Now, open the front cover and then close it; this resets the device. If you are using the stack bypass tray, close it before opening the front cover. Close the front cover gently holding the handle (A) of it.
  • Feeder.
  1. Open the feeder cover.
  2. Hold the paper carefully and pull it out.
  3. If the paper doesn’t come out smoothly, open the inner cover.
  4. Gently lift the release lever and let it click into place.
  5. Remove the jammed paper very carefully, make sure not to tear it.
  6. Set the release lever properly into its place.
  7. Now, close the inner cover and the feeder.
  • Drawer 1 or 2.
  1. Carefully pull the paper drawer half way out.
  2. Push the jammed paper down and try to remove it.
  3. Push the drawer back into its place; make sure you hear a click when it sets into its original position.
  4. Reset the machine by opening the front cover and then closing it.
  • Duplex unit.
  1. Gently lift the scanning platform and make sure it gets locked in the position.
  2. Hold the centre tab and carefully open the inner cover.
  3. Hold both sides of the jammed paper firmly and pull it out without causing a tear.
  4. Now, close the inner cover properly.
  5. Carefully place the scanning platform in its original position by lowering it.
  6. Reset the machine by opening the front cover and then closing it.
  • If the message indicating “Canon IR2270 paper jam problem” jammed paper still recurs.
  1. Turn the device off by the main power switch.
  2. Properly disconnect the power cord.
  3. Gently lift the scanning platform and make sure it gets locked in the position.
  4. Open the fixing cover by gently grasping and pulling the tab on the left side of the top cover.
  5. Now, set the control panel in an upright position.
  6. Hold the fixing unit in place by the parts indicated with arrows.
  7. Detach the fixing unit from the machine carefully.
  8. Open its cover gently.
  9. Now, hold the jammed paper with both hands and pull it out without causing a tear.
  10. Reinstall the fixing unit into the machine very carefully and make sure to close its cover.
  11. Place the scanning platform in its original position by lowering it
  12. Reconnect the power cord and turn on the main power switch.

Comment below if you have any queries regarding How to resolve Canon IR2270 paper jam problem 

You may also see:

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *