How to fix 6A81 Error in Canon Printer MG5320 ?

What is 6A81 Error in Canon Printer MG5320 ?

The error code is essentially caused by an obstruction among the printer, typically a paper jam, however, could be any foreign body that has found its method into the printer (those with young kids can understand). The obstruction stops the carriage and print head from getting into the proper position once powering up the printer. The print head ought to return to rest at the correct hand aspect of the carriage and position itself over the waste ink sponges. If the print head is unable to do so, it returns the ‘6A81 Error in Canon Printer MG5320’ error message.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

Sometimes, the position of the two waste ink sponges towards the correct hand aspect. The sponges are spring loaded and move backward and forwards once the printer data format happens upon embark.

The problem in some of the user’s case was caused by two items of torn paper. One at the way right of the printer that was simple to get rid of, however, the other was stuck in a very little opening behind the spring mechanism for the waste ink sponges. This was preventing the sponges from being affected freely and seated properly, that successively meant that the print head was unable to miss them and are available to rest within the correct position.

To remove the torn paper we just have to turn off the power to the printer (to stop any harm to the carriage mechanism) and used a try of tweezers to carefully pull the offending article through the little gap. We may have a tendency to lost this hidden piece of paper at an initial time. We checked for obstructions, therefore, it’s worth shining a torch in and having a good nose around. Close your printer lid, power on the printer.6A81 Error in Canon Printer MG5320

Solution for 6A81 Error in Canon Printer MG5320:

There are some simple steps to overcome 6A81 Error in Canon Printer MG5320-

Solution 1:

This is often a purge unit error.

There may be one thing jamming the purge unit or simply an absorber out of place that is picking up on the carriage preventing it from moving properly.

Try to move the carriage faraway from the purge (its wherever the printhead/carriage parks its self on the correct aspect of the machine) with no resistance then you’ll be able to shine a torch into the machine and look at the purge unit.

There maybe crumpled paper jammed within the purge.

If all looks well, the purge unit could also be defective and had to get replaced.

Solution 2:

The wiper on the purge might have stuck. It slides back and forth and that they are known to stay.

Push it with an extended screwdriver to check if it moves.

Solution 3:

Something is blocking the printer within. It may well be a paper jam or a foreign object.

Check to employ a flashlight, to confirm there’s nothing obstructing the device mechanism down within the printer wherever it’s not simply seen.

If there’s nothing obvious, undo the printer power provide.

Solution (3-a)

Printer off.

Bring by hand the ink-carrier to the correct aspect.

Push down fastidiously on the carrier, hold on and shelter the printer: push the left side of the carrier down, as a result of it can return up.

Solution 4:

Take a dry material and clean the rubber rollers within the automatic sheet feeder. Dirt could also be coating the rollers there and as they become less tacky, they can’t feed paper properly.

Solution 5:

Hold the printer in each hands (you may have another person to assist you), flip it upside down and shake it for a couple of seconds to check if something falls out of the device space. (Sometimes objects like pens, paper clips and so on, will constitute the device space and cause blockages.)

Then plug the printer duplicate, take your paper out and replace it with a recent, little stack (about 5 pages) of paper. Then try and form feed once more. If that works, then try and print once more

Thus Follow these steps to resolve ” 6A81 Error in Canon Printer MG5320″

Comment below if you have any queries regarding 6A81 Error in Canon Printer MG5320

You may also see:

How to fix Canon LBP 2900 Feeder Problem ?

Canon LBP 2900 Feeder Problem:

Paper feed problem may occur anytime with any branded printer if not used in the correct manner. No matter, how expensive the machine is, it tends to occur some technical faults when using for a long time. Canon is a well-known brand of a printer but users confront the same issues in it as in other products. Well, it’s not like that the problem is due to machine, it may cause due to your carelessness also. Instead of blaming anyone else, let’s move ahead with its solution.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

Symptom of Canon LBP 2900 Feeder Problem :

Feeding blank sheets endlessly and some time obtaining Paper Jam Error on a computer screen with paper suction within the printer.

As per symptom, the probable culprit area is Paper pick up assembly. Even on removing the cartridge for visual review because sometime you’ll be able to realize ball pen, refills paper clips, eraser elastic band and so on in paper pickup assembly (Mishandling by the user and if this can be for home use then it positive this inventive work done by children’s).

But as after inspection from toner cartridge location, sometimes we can find any suspicious things as explicit above. Therefore, we to dismantle the printer.Canon LBP 2900 Feeder Problem

First of all, we have to remove the paper pickup pad unit and clean the area with IP.

As per explicit the fault symptom, the which means that it’ll simply keep throwing out blank sheets no end the Gear once single page output signal command. Therefore this half is handling by solenoid Unit that gets a signal from the logic board and it decides wherever to prevent the paper pickup gear once the printing.

So we have to removed solenoid unit from the Printer for any review.

On removal by visual inspecting the solenoid unit, there could be found some sticky grease like substance is there on coil clutch plate.

So clean the surface with wet material with IP. Therefore here is that the culprit for higher than said fault symptom. Solenoids are accustomed to controlling the timing of the paper feeding.

Just clean the coil with IP tack everything back and tested by giving print commands from the setup, it works fine while not paper jam and not feeding blank sheets endlessly.

How to resolve Canon LBP 2900 Feeder Problem ?

Paper not feeding properly may be accompanied by paper jams, too. Printer and paper preparation will go an extended way to alleviate these types of problems. Follow some steps to make sure your paper feeds properly in your Canon printer.

Step 1.

Remove any jammed paper from the Canon printer. Pull the paper out from the sheet feeder within the direction that the paper was traveling. this can facilitate avoid damage to the rollers and associated plastic components. allow the printer to reset itself subsequently.

Step 2.

Lift any covers and lids, and wipe the rollers with a soft, damp cloth. a light-weight colored cloth can help you identify dirt that comes off the rollers. Clean the rollers gently with the cloth. Clean the rollers till no a lot of dirt seems on the cloth. allow the rollers to dry.

Step 3.

Fan and so load recent paper within the Canon printer. Use dry, flat paper. Do not fill up the tray. Discard any paper that curls or is wrinkled. Load the paper in order that the left edge rests against the paper guide. Set the paper guide in order that it fits the paper. You’ll see adorned markings on the paper receptacle that represent the dimensions of the paper you’re using. For example, move the paper guide to the “Letter” position if you’re using letter-sized paper. Make sure the paper is stacked perpendicular to the receptacle. Everything ought to be square.

Step 4.

Try the print job once more.

Clearing Paper Jams:

Paper Pickup and Transfer Guide Areas
Fusing Assembly space – top cover
Paper Jams: Rear cover – Fusing Assembly and Paper Exit Areas
Paper Jams: 500-sheet Lower cassette (not applicable at ING)
Paper Jams: optional Duplex Unit (not applicable at ING)
Table repeated Paper Jams
Paper jams occur most frequently when:

Paper cassettes don’t seem to be properly loaded.
Your print media doesn’t meet the specifications.
The media is in poor condition.
The printer desires improvement.
User-replaceable elements are carrying out.

Thus Follow these steps to resolve Canon LBP 2900 Feeder Problem

Comment below if you have any queries regarding Canon LBP 2900 Feeder Problem

You may also see:

Canon Printer Error 5200

[Resolved] How to fix Canon Printer Error 5200 ?

What is Canon Printer Error 5200 ?

The Canon Printer Error 5200 code has to do with ink levels and usage inside the printer. The printer is programmed to combine all of the remaining ink colours to form black. Soon this suggests that all ink cartridges installed within the printer are empty or getting ready to empty. Therefore the operator appearance at the ink level guide to ascertain that the black is gone and colours are nearly gone, and that they proceed by exchange solely the black ink, with the intention to use the remainder of the colour ink within the cartridges.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

However, once the black ink is put in, generally a malfunction of the printer and ink level reader can cause the error code 5200 to appear. There are some who feel this could be a conspiracy of the ink racket to sell a lot of ink by forcing you to replace all cartridges at once.

Regardless of any ulterior motives concerned in this error code, there are some simple solutions you’ll attempt to get the error to go away.

How To Reset the Canon Printer Error 5200 :

The first step in trying to resolve the error code 5200 is to show the printer off and wait many seconds before turning it back on. this could have the impact of resetting the ink level scanners in order that they read properly.Canon Printer Error 5200

If this doesn’t work, following step is to get rid of the power cord and fully unplug the printer. This could serve constant reset operate as turning the printer on and off however might do the trick if the primary step fails.

If the printer is plugged directly into an outlet and none of the above is functioning, try the following fix: turn the printer off, press the stop button and hold it down for two seconds, press the ON button, hold it and release the stop button, press the stop button 5 times then release alongside the on button. The LCD screen are blank and also the printer can reset. The pc might say that new hardware is detected – you’ll simply ignore that. Turn the printer off then turn it on an extra time.

If you have got tried all of the higher than and there’s still no improvement to the error 5200 situations, you would like to move on to dynamical out all of the ink cartridges. Even though they’re largely full, you would like to only plow ahead and place altogether new ink. This could cause a reset within the ink level gauges still, which could solve the matter.

Contact Canon directly if you can not get the error 5200 code to travel away. Your printer should be below pledge and you will be able to get further facilitate to resolve the error, otherwise, you can be entitled to a new printer

Simple steps to resolve Canon Printer Error 5200 problem:

Here are some of reasons for 5200 error to appear. Starting from the highest, proceed to consequent list item to clear the message.

  • The remaining ink level is low.
  • Check the ink level status. If the cartridge is empty, replace the cartridge.
  • The ink cartridge is defective. Replace the cartridge with a new one.
  • Instructions to replace the cartridge.
  • If replacing the cartridge doesn’t clear the error, power the printer off and on.
  • Turn off the printer by pressing the ON button.
  • Unplug the power wire
  • Plug the power wire back in then press the ON button.
  • If powering off the printer and back on doesn’t clear the error, contact the Contact Center.
  • Canon printers give reliable quality printing for home and workplace use. However, after you receive an error code 5200 on your Canon Printer, it is an exasperating situation. Here could be a simple guide to assist you solve the matter so you’ll come back to to work.

Comment below if you have any queries regarding Canon Printer Error 5200

You may also see:

Canon Printer Rear Tray Problem

How to fix Canon Printer Rear Tray Problem ?

How Canon Printer Rear Tray Problem occur ?

When you close the feed slot cover once loading paper or after you in To prevent incorrect printing, this printer features a function that detects whether or not the knowledge set for the paper loaded on the rear tray or within the container matches the paper settings. Before printing, create paper settings in accordance with the paper info.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

once this perform is enabled, an error message is displayed if these settings don’t match to stop incorrect printing. once this error message is displayed, check and proper the paper settings.sert a cassette into the printer after loading paper, the screen for setting the kind and size of paper is displayed. Set the paper info per the sort and size of loaded paper.

Canon Printer Rear Tray Problem

To check rear tray paper info or container paper info, show the paper info screen on the operation panel.

Simple steps to resolve the Canon Printer Rear Tray Problem:

You can load plain paper or exposure paper.

You can conjointly load envelopes within the rear tray.

  1. Prepare paper.
  • Align the edges of the paper. If the paper is curled, flatten it.

Note:

  • Align the sides of paper neatly before loading. Loading paper while not aligning the sides might cause paper jams.
  • If the paper is curled, hold the curled corners and gently bend them within the other way till the paper becomes fully flat.
  1. Load paper.
  • Open the rear tray cover so pull up the paper support.
  • Open the feed slot cover.
  • Slide the paper guides to open them and load the paper within the center of the rear tray WITH THE PRINT side FACING UP.
  • Slide the paper guides to align them with each side of the paper stack.
  • Do not slide the paper guides too arduous against the paper. The paper might not be fed properly.

Important:

  • Always load paper within the portrait orientation. Loading paper within the landscape orientation will cause paper jams.

Important points to remember for overcome the Canon Printer Rear Tray Problem:

  • If the feed slot cover is open, paper can’t be fed. make sure to close the feed slot cover.
  • After closing the feed slot cowl, the paper info registration screen for the rear tray is displayed on the touchscreen.
  • Select the size and kind of the loaded paper within the rear tray at Page size and kind, so choose Register.
  • Open the operation panel, pull out the paper output tray and paper output support, and open the output tray extension.
  • Be sure to open the operation panel before printing. If the operation panel is shut, the printer doesn’t begin printing.

Note:

  • When printing, choose the size and kind of the loaded paper on the print settings screen of the operation panel or printer driver.
  • For instructions on specifying the device supply once printing from a Windows computer, click here.
  • For instructions on specifying the paper feed supply once printing from a mac, click here.

Thus Follow these steps to resolve Canon Printer Rear Tray Problem

Comment below if you have any queries regarding Canon Printer Rear Tray Problem

You may also see:

How to fix Canon printer error code 2 140 21 ?

Why does canon printer error code 2 140 21 occur?

Canon printer error code 2 140 21 generally occurs when the scanner is being used/ installed. It can lead to poor Canon Printer performance and bad print results.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

I’m encountering Canon printer error code 2 140 21 on my canon printer which is connected to a mac. How should I resolve this issue?

  1. Make sure all your files are saved and then close all the running programs.
  2. Now, properly turn off the device.
  3. Next, restart your device.
  4. Go to “System Preferences”.
  5. Look for “Print & Fax” in the following window and then click on it.
  6. Click on the device in use in the “Printer & Scanner” list and click the “– “button to remove it.
  7. Now go to your main hard drive (Macintosh HD).
  8. Open “Library” and then navigate to “Image Capture”.
  9. Look for “Devices” in the following window and then remove all the files named after the printer.
  10. Go back to the Image capture window now.
  11. Select “TWAIN Data Sources” and then remove all the files named after the printer.
  12. Exit the library and refresh your system.
  13. Finally, use the installation disc that comes with the printer to reinstall it. You can also do so by downloading the drivers from Canon’s website if you don’t have the disc.

Canon printer error code 2 140 21

I’m encountering error 214021 on my computer while using my Canon printer. What should I do?

Simple steps to resolve Canon printer error code 2 140 21:

Step 1- Reinstall your printer/scanner drivers.

  • Press the Windows Start button.
  • Type “devmgmt.msc” and then press Enter.
  • In the window that opens next, select “Imaging devices”.
  • Look for your device in the list and then right click on it.
  • Select “Uninstall” from the drop-down menu.
  • Restart the computer and your drivers should be reinstalled.

Step 2- Force stop the process.

  • Open the control panel.
  • Now, go to “devices”.
  • Select “Printer” from the device list.
  • Click on “Stop printing”.
  • This will end any ongoing printing/ scanning process.
  • Fresh start the process.

Step 3- Reset or restart your printer.

  • Make sure you unplug the printer from the power source.
  • Let the printer be in this pause mode for a couple of seconds.
  • Now, reconnect the power source to the printer and switch it on.
  • Next, press the “Power” button and hold it for a few seconds.
  • Press the “Stop” button twice now.
  • Repeat this procedure once more.
  • Release the “Power” button gently when you repeat the process.
  • Lastly, press the “Stop” button four times.

Step 4- Reset the driver of the printer.

  •  Carefully clean the cartridge and then push the reset button for 5 seconds.

Step 5- Replace the cartridge.

  • Check the ink levels of the cartridge(s) in your printer and replace the ones with low ink levels.
  • Be very careful while removing and reinstalling the cartridge(s) in order to protect your device from any hardware damage.

If none of the steps given above helps to solve your problem, contact the Canon customer service for further assistance.

Thus Follow these steps to resolve Canon printer error code 2 140 21

Comment below if you have any queries regarding Canon printer error code 2 140 21

You may also see:

How to fix Canon Printer Error C000 ?

What is Canon Printer Error C000 ?

Canon Printer Error C000 is an error code that has been noted to have an effect on a large variety of completely different Canon devices, particularly the Pixma series of Canon printers and multifunctional devices. Error C000 indicates that an internal error has occurred with the Canon device in question which it’s as a result of this internal issue that the device cannot operate because it is meant to. Error C000 will be pretty frustrating, particularly since it inhibits the typical Canon device’s vary of functions. However, in most cases, there are a variety of various ways in which will be used to resolve Error C000.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

Error message c000 showing on your Canon Printers Screen is kind of common and can sometimes be resolved by attempting many procedures. Typically it is often resolved by merely turning the printer OFF and ON once more. If this does not fix the error then you will get to investigate it more and check out some of the following:

  1. Firstly, check for a paper jam related to the carriage that the print head runs back and forth on. Check for a little piece of paper packed close to the tip of the printhead carriage.
  2. The Ink Cartridges might not be seated properly. Attempt removing all ink tanks so reseat all of them firmly. If this does not take away the error attempt step 3.
  3. Attempt reseating the particular print head. This can be done by removing all of the ink tanks from the print head. Next release the print head by raising the lever on the proper hand aspect of the print head itself. Once totally removed replace it and lower the lever to lock the print head back in.Canon Printer Error C000

Usually, this can fix the c000 error because it typically indicates that there’s a tangle with the electrical connections between the print head and also the actual printer.

If the matter persists you will need to seem into commutation the printer as print heads are sometimes not less expensive than the price of commutation the full printer.

What to Do : Canon Printer Error C000 ?

  1. Cancel printing and switch off the printer.
  2. Check the following:
  3. Make sure print head holder motion isn’t impeded by tapes for securing the print head holder throughout transportation, packed paper, etc.
  4. Remove any impediment.
  5. Make sure the ink tanks are properly installed.
  6. Press ink tanks till they click into place.
  7. Turn the printer back on.
  8. If this doesn’t solve the matter, contact your nearest Canon service center to request a repair.

Important-

When clearing an impediment to print head holder motion, take care to not touch white belt.

Solution:

Canon Printer Error C000

  • There are many reasons for error C000 to appear. this article provides you recommendations with links to clear the message.
  • To clear the error, click on the link to open the article and acquire careful directions.
  • All packing material wasn’t removed.
  • An ink tank(s) isn’t seated properly.
  • Paper is jammed or there’s an object within the printer.
  • The printer must be reset.
  • If the higher than recommendations don’t assist you to resolve the error, the printer can have to be compelled to be repaired.

Thus Follow these steps to resolve Canon Printer Error C000

Comment below if you have any queries regarding Canon Printer Error C000

You may also see:

[Solved] Paper jam problem in canon ir3300 ?

How to fix paper jam problem in canon ir3300 ?

Fixing a paper jam is like bandaging a small cut on the wrist, one small problem can evolve into a really big one. For example, lets say you get bit by a mosquito and a small cut appears from scratching; besides the really bad itch, you noticed a fever approaching plus a constant headache. Instead of addressing the problem you say to yourself “oh it’s just temporary it’ll leave soon”, then go about your week like nothing happened and more symptoms continue to build leaving the issue harder to treat than it already was.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

Well it’s the same for a jammed printer; a frequently jammed printer can caused the rollers to get damaged. If you don’t know what rollers are, then Look it up! No but seriously, rollers are just used to reel in sheets from the input tray.

Identifying the cause : paper jam problem in canon ir3300: 

Paper jam problem in canon ir3300

First thing first, we need to identify the problems that may cause a printer to get jammed (which is a lot) on the occasion that you don’t know anything about printers or lack in the researching department then it can become very frustrating for you.

Second thing (or maybe first thing and a half or maybe both)

  Soulutions for paper jam problem in canon ir3300 :

  1. Overfilling the papertray- this is without a doubt the most common problem people comes face to face with when having a jammed printer, the solution is to only fill the papertray with the appropriate or recommended amount of paper.
  2. Using different papers than normal- printers are made to take in certain type of papers with the same size and height, any slight change can be the cause of a paper jam, including ripped papers, completely torn off papers or papers that are stuck together, solution is to make sure you are using brand new papers that are right in size and not torn.
  3. Damaged rollers- i mentioned a little about this above. Excessive use of printing and frequently occurrences of paper jams can cause the rollers to get damaged. Not caring for the printers properly can also cause this. Rollers will eventually become unusable at some point in time like every electronic device that goes through a rough time when used.

These are the most common problems majority of the people face with jammed papers in printers.

Some additional problems are debris from frequently paper jams occurrences and paper that’s being chopped little by little. It will build overtime which may result in the passage that the sheets are supposed to come through being blocked. These are mostly caused by cheap paper that gets torn by the pressure of the rollers.

Most importantly, always handle your printers with care and giving it the proper diagnosis is the best way to go and should be done often if you want your canon ir3300 to llive a long and healthy life. That’s right; you should care for your printers as you would care for a disabled love one

Thus Follow these steps to resolve paper jam problem in canon ir3300

Comment below if you have any queries regarding paper jam problem in canon ir3300

You may also see:

How to fix Canon printer error P02 ?

What causes error P02 in Canon printers ?

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268
  • It could be a cartridge related issue such as misplacement of the cartridge or spilling ink.
  • The connectors being incorrectly connected could cause this error.
  • Foreign object jammed in the printer can cause this error too.
  • The encoder film being smeared is another possible reason for this error to occur.Canon printer error P02

My canon printer is displaying error P02 when I try to use it. How should I resolve this error?

Step 1 – Make sure the Encoder Film isn’t smeared.

  1. Turn off the printer and unplug it from the power source.
  2. Carefully open the Paper Output Cover.
  3. Check if the Encoder Film inside the printer is clear.
  4. If the Encoder Film is smeared, follow the steps given below to clean it-
  • Get cotton swabs and isopropyl alcohol.
  • Dip a cotton swab in isopropyl alcohol. Make sure you press out the extra alcohol from the swab.
  • Gently wipe the Encoder Film with the wet cotton swab. Be careful to not let any alcohol drops inside the printer.
  • Carefully clean the film until it becomes completely transparent.
  • In case any moisture is left on the film, wipe it with a dry cotton swab, and make sure the film dries completely.

       5. Now, close the Paper Output Cover, and plug the printer back into the power source.

       6.Turn the printer on.

       7.Print a pattern to confirm that the printing has resumed normally; if not, check and clean the Encoder Film again.

Step 2- Restart the printer.

  • Make sure you unplug the printer from the power source.
  • Let the printer be in this pause mode for a couple of seconds.
  • Now, reconnect the power source to the printer and switch it on.
  • Next, press the “Power” button and hold it for a few seconds.
  • Press the “Stop” button twice now.
  • Repeat this procedure once more.
  • Release the “Power” button gently when you repeat the process.
  • Lastly, press the “Stop” button four times.

Step 3- Adjust the cartridges.

  1. Turn off the printer and unplug the power cords.
  2. Now, gently start removing the cartridges from the printer.
  3. Make sure the ink levels of the cartridges are enough beforehand.
  4. Replace the cartridges with low ink levels.
  5. Now, carefully put the cartridges back into their respective places.

Step 4- Check if paper or any other foreign object is jammed in the printer.

        1-Gently pull the paper out.

  • Carefully hold the paper and pull it out without tearing it.
  • Do not pull the paper out from the front tray as doing so forcibly can damage the machine.

       2.If you cannot pull the paper out-

  • Turn the printer off and then on again; this may eject the paper automatically.
  • If not, try to pull the paper out from the transport unit.
  • If you fail to remove the paper from the paper output slot, open the paper output cover to pull it out.

Step 5- Check for defective hardware parts in the printer.

       1.Make sure you carefully examine the printer; especially the parts mentioned below-

  • Timing slit film
  • Carriage units
  • Logic boards
  • Carriage motor

      2.If you find any defects with the hardware, it is recommended to have a certified technician replace them.

If none of the steps given above helps solve your problem, contact the Canon customer service

Thus Follow these steps to resolve Canon printer error P02 code 

Comment below if you have any queries regarding How to fix Canon printer error P02 

You may also see:

How to fix Canon printer error 5b00 ?

The Continuous Ink System adopted by Canon recently can sometimes cause the cartridge to leak ink into the printer. This fills up the printing pads and causes the Canon printer error 5b00.

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

How to get rid of error 5b00 from a Canon printer?

Simple steps to resolve the Canon printer error 5b00:

Step 1- Set the printer back to factory settings.

  • Turn off the printer from the main switch.
  • Now, press and hold the “stop” button.
  • Press the “on/off button” on the printer while pressing the stop button.
  • Now, let go of the stop button and then press it twice in a row. Make sure you hold the on/off button meanwhile.
  • Release all the buttons now.
  • Canon printer error 5b00

Finally, press the stop button again five times in a row and then press the on/off button twice.

Step 2- Run the printer in service mode.

  • Turn “ON” your printer.
  • Press the menu button on the printer.
  • Now, press the “scan” button followed by the “copy” and then the “scan” button again.
  • Now, press the “+” key until you reach the “counter access” option.
  • Press the OK button once you reach the counter access button.
  • The total number of pages you’ve printed so far is displayed on the printer screen now.
  • Press the “OK” key to move forward.
  • Now, press the “copy” button.
  • Press the “- “key to decrease the number of pages to zero. This is a long process so please be patient.
  • Now, press “OK”.
  • Navigate through the menu to reach “scan page count”.
  • Repeat steps 8 and 9 to decrease this number to zero.
  • Now, navigate through the menu to get to “ABS-M don’t count” option.
  • Decrease this number to zero too and then click “OK”.
  • Once you’ve completed the steps above successfully, press the “stop” button.
  • Finally, turn your printer off and then on again.

Step 3-  Install a restoring program.

  • Download the 5B00 error restoring program for Canon printers.
  • Save the program somewhere easily accessible.
  • Turn off your printer.
  • Now, press and hold the stop button and then press the on/off button.
  • Hold on to the on/off button and release the stop button.
  • Now, let go of the stop button and then press it five times consecutively. Make sure you hold the on/off button meanwhile
  • Release both the keys now.
  • Now, open the restore program folder and double-click on the “SERVICETOOL .EXE” file.
  • Click on the “Reload” button and connect your printer to another USB port.
  • Press the main button on the printer and then place some blank sheets on the paper tray.
  • Press “ok” when the “error 001” message appears on the screen.
  • Now, turn the printer off by pressing the on/off button on it.
  • Turn the printer back on and perform a test print to make sure the error has disappeared now.

If the steps above don’t solve this problem(Canon printer error 5b00) ,contact the Canon customer service.

Comment below if you have any queries regarding Canon printer error 5b00

You may also see:

How to resolve Canon IR2270 paper jam problem

[Solved] How to resolve Canon IR2270 paper jam problem ?

Canon IR2270 paper jam problem can be easily resolved by Canon Printer tech Support, Just Contact Canon Tech Support

 Country  Toll-Free Number
Canon Printer Support phone number   1-844-813-3268

What are the causes of Canon IR2270 paper jam problem ? 

First of all, the error message Canon IR2270 paper jam problem to find out where exactly in the printer is the paper jammed. Once you’ve figured that out.

How to resolve Canon IR2270 paper jam problem

How to get rid of Canon IR2270 paper jam problem ?

Follow the steps given below for different areas to resolve Canon IR2270 paper jam problem.

  • Delivery tray.
  1. Remove the paper from the “output tray” is the message displayed if the paper is stuck there.
  2. Hold the paper gently from both sides and pull it out very carefully. Make sure you don’t tear it during the removal
  3. Now, open the front cover and then close it; this resets the device. If you are using the stack bypass tray, close it before opening the front cover. Close the front cover gently holding the handle (A) of it.
  • Feeder.
  1. Open the feeder cover.
  2. Hold the paper carefully and pull it out.
  3. If the paper doesn’t come out smoothly, open the inner cover.
  4. Gently lift the release lever and let it click into place.
  5. Remove the jammed paper very carefully, make sure not to tear it.
  6. Set the release lever properly into its place.
  7. Now, close the inner cover and the feeder.
  • Drawer 1 or 2.
  1. Carefully pull the paper drawer half way out.
  2. Push the jammed paper down and try to remove it.
  3. Push the drawer back into its place; make sure you hear a click when it sets into its original position.
  4. Reset the machine by opening the front cover and then closing it.
  • Duplex unit.
  1. Gently lift the scanning platform and make sure it gets locked in the position.
  2. Hold the centre tab and carefully open the inner cover.
  3. Hold both sides of the jammed paper firmly and pull it out without causing a tear.
  4. Now, close the inner cover properly.
  5. Carefully place the scanning platform in its original position by lowering it.
  6. Reset the machine by opening the front cover and then closing it.
  • If the message indicating “Canon IR2270 paper jam problem” jammed paper still recurs.
  1. Turn the device off by the main power switch.
  2. Properly disconnect the power cord.
  3. Gently lift the scanning platform and make sure it gets locked in the position.
  4. Open the fixing cover by gently grasping and pulling the tab on the left side of the top cover.
  5. Now, set the control panel in an upright position.
  6. Hold the fixing unit in place by the parts indicated with arrows.
  7. Detach the fixing unit from the machine carefully.
  8. Open its cover gently.
  9. Now, hold the jammed paper with both hands and pull it out without causing a tear.
  10. Reinstall the fixing unit into the machine very carefully and make sure to close its cover.
  11. Place the scanning platform in its original position by lowering it
  12. Reconnect the power cord and turn on the main power switch.

Comment below if you have any queries regarding How to resolve Canon IR2270 paper jam problem 

You may also see: